Stormwater Ordinance Model and Commentary

Table of Contents

x

There are numerous options for how low-impact development and stormwater BMP standards may be integrated into a local government’s various regulations. For example, they can be organized as a stand-alone chapter of a zoning and development code, or integrated into other site development standards (such as access and connectivity, erosion and sediment control, open space, and sensitive area protection). They also can be located outside the zoning regulations altogether, such as within technical engineering manuals, stormwater master plans, or other similar documents.

Wherever located in the regulatory framework, key issues to consider when adopting LID and stormwater requirements include the following:

  • Purpose and intent
  • Applicability
  • Stormwater management site design standards

The following sections describe each of these elements and provide standard language that can be considered by Colorado local governments. Model language is in gray shading. Commentary is located in italics in the column at the right. The model language used in this document is based on several existing ordinances and programs from varying communities around the state and the nation, including municipalities and counties. The language is illustrative only; consult local counsel to tailor language for your jurisdiction.

Cross-Reference Technical Standards: Many zoning and land development codes simply cross-reference adopted stormwater management guidelines or criteria manuals.

Purpose and Intent

Stormwater-related provisions may be found throughout a development code, whenever water quality issues are triggered. For example, consider the following purpose statement authorizing cluster development: 

 

“This [ordinance/section/etc.] is intended to allow for the construction of [residential/commercial/all development] that promotes clustering arrangements. Flexibility is allowed in lot design in order to achieve alternative layouts than help preserve natural resources and allow for creative stormwater management solutions.”

 

Or this more general purpose statement related to stormwater management:

 

This [ordinance/section/etc.] is intended to reduce the quantity of stormwater runoff generated, improve the quality of stormwater as it leaves a site, and increase the amount of onsite stormwater infiltration.

 

Purpose and intent statements should draw on applicable language from the comprehensive plan, if available. Comprehensive plans increasingly address issues like sustainability, resilience, and water quality that often include policies that support the development of LID code requirements and encourage the use of stormwater BMPs. 

 
Applicability

A threshold decision for all communities is whether to encourage or require the use of LID principles and stormwater BMPs for new development. The more significant the stormwater issue in the community (hopefully documented in adopted plans), the more likely the community will mandate the use of LID and stormwater BMPs. 

Exceptions to general development standards should be considered for projects anticipated to have relatively low impacts on stormwater quality or quantity. For example, consider the following conditions for exemptions from LID or stormwater and water quality standards:

 

Exceptions to this [ordinance/section/etc.] include:

A. New single-family or two-family residential developments (or redevelopments) that are not part of a new subdivision and that disturb an area of less than one acre.

B. Parking lot maintenance of existing pavement, or replacement or removal of pavement of less than one-half acre with drainage patterns unchanged.

Categories of Development: If categories of development are established, those thresholds can apply more broadly to the site plan review procedure and other development standards, not just for drainage or water quality. A community would not want to classify a “major” development differently within the context of drainage and water quality than it does for general site plan review procedures.

Applicability: If required, the jurisdiction also must consider what types of development will be subject to the standards. For example, does all new development have to include LID elements? The general trend is increasingly to require the implementation of LID principles in most new development, particularly auto-intensive uses that have significant amounts of parking and/or other impervious cover.

When establishing the applicability of stormwater requirements, many communities set thresholds and hold projects of different types to different standards. For example, new development can be categorized as minor development, moderate development, major development, and/or redevelopment. Major development would include the most significant potential impacts to stormwater quantity or quality and would be subject to the most stringent regulations. 

 
Stormwater Management Standards

Because of the importance of reducing the quantity of stormwater runoff, most communities that mandate any type of low-impact development establish a broad requirement that post-development stormwater runoff rates be the same as or less than pre-development rates. Beyond that basic requirement, there are a variety of opportunities for integrating LID and stormwater BMPs into development codes. The sections below discuss some of these options.

Require Onsite Stormwater Management

The treatment and retention of stormwater onsite is an important goal of most regulations. Communities can reduce the amount of runoff that leaves a site by adopting minimum onsite stormwater management controls, such as:

 

A. Development shall infiltrate [90 percent] of runoff through on-site management.

B. Development shall control either [85 percent of a 24-hour storm runoff event], or [10 percent of the 50-year peak flow rate] through landscape-based treatment to the maximum extent possible.

C. Development shall reduce urban runoff from all impermeable surfaces by [0.75 inches] using infiltration or treatment and release.

 

Impervious areas can be further reduced or “disconnected” by allowing methods for infiltration such as disconnecting downspouts, pavement disconnection (curb cuts), tree canopy increase, reducing impervious cover, and using green roofs or porous paving materials. 

Dimensional Standards

Directly limiting impervious surface or building coverage can improve infiltration and vastly reduce total stormwater runoff. Consider the following:

 

In the [_______ zoning district], building coverage shall not exceed [30 percent] of the total lot.

 

Communities could also consider a system by which impervious coverage maximums are scaled to the size of the development, with more dense districts allowing for greater impervious coverages as shown in an example below.

 

Maximum impervious lot coverage shall not exceed the following percentages:

Size of Development Project

R-1 district

Low
Density

R-2 district

Medium Density

R-3 district

High
Density

Less than 15,000 sf

50 percent

50 percent

60 percent

Between 15,000 sf and 49,999 sf

40 percent

50 percent

60 percent

Between 50,000 and 200,000 sf

25 percent

50 percent

60 percent

More than 200,000 sf

10 percent

50 percent

60 percent

 

The jurisdiction can adjust minimum lot sizes if necessary to accommodate LID and achieve permitted densities:

 

If compliance with [LID standards/stormwater BMPs] can only be achieved by increasing the amount of open space or landscaping beyond that otherwise required, the maximum residential density shall be calculated as though the additional required open space or landscaped area is developable land for dwellings, and the minimum lot sizes shall be adjusted as necessary to accommodate additional residential dwelling units permitted by that calculation. 

 

Landscaping and Screening 

Encouraging or requiring low-water and native landscaping can help create a more natural landscape and ultimately improve water quality and conservation efforts. Allowing for natural berms or screening materials other than walls can help improve drainage and reduce runoff. Some examples of integrating LID and stormwater BMPs into landscaping requirements are included below.

Incorporating LID into landscaping purpose statement: 

 

The purpose of these urban landscape standards is to help support the creation of attractive places that reduce the negative impacts of an urban environment by:

  1. Requiring canopies of tree-lined streets;
  2. Requiring integration of xeriscape plant materials; and
  3. Developing standards for public spaces.
 

Address future impervious areas added following a certificate of occupancy:

 

Following the issuance of the initial certificate of occupancy, if additional impervious area in excess of [500 square feet] is added to the site, open spaces and landscaped areas shall be revised to provide the required capture volume for the additional impervious area.

 

Parking and Loading

Reducing the minimum amount of required parking and loading areas can be one of the most impactful and effective techniques a local government can take to reduce stormwater quantity and improve water quality. Some communities establish parking maximums, and further establish that those maximums can only be exceeded if using LID principles such as porous pavers, or grass-lined swales within the parking design. Other communities are eliminating loading berth requirements to reduce runoff. For example:

 

A. Maximum parking requirements can be exceeded up to [ten percent] if pervious pavement or pavers are used for the amount of parking in excess of the maximum parking requirements.

B. Retail sales and services with an aggregate gross floor area of less than [15,000 square feet] shall not be required to provide loading spaces.

Parking and Loading: Parking standards require striking a balance between several competing interests. For example, reducing parking or setting parking maximums can result in improved water quality and reduced runoff; however, neighborhoods are often concerned with adjacent commercial parking inadequacies resulting in spillover onto residential streets.

Parking lot design should also be considered for incorporation of LID principles, such as:

 

A. Structured parking is required for some zoning districts or uses (thus reducing the per-space impermeable surface);

B. Landscaped swales are required between parking rows;

C. Breaks in curbs are required so that parking lot runoff flows into landscaped areas; and

D. Landscaped islands are required to break up large parking areas (such as blocks of 20 spaces or more).

 

Subdivision and Site Design Standards 

The layout and design of new subdivisions presents an opportunity to consider overall stormwater drainage and LID techniques (e.g., clustering lots to preserve greater opportunities for natural drainage and detention within the project). Consider alternative approaches to subdivision and circulation design, by implementing LID principles such as:

 

A. Requiring alternative residential street layouts with narrower, open-section streets;

B. Limiting on-street parking to one side of the street where possible;

C. Incorporating bioswales and tree-lined streets;

D. Encouraging shared driveways for certain residential uses; and

E. Reducing minimum driveway widths.

Subdivision and Site Design Standards: Communities often include a separate section for subdivision design and site layout standards within a development standards chapter of the zoning code. Procedures related to subdivision approvals should be located with other development application approval procedures.

Place the burden on the applicant to demonstrate why LID techniques could not be pursued under certain conditions:

 

For subdivisions where LID techniques are technically infeasible to meet stormwater quantity standards, the applicant shall provide a full justification and demonstrate why the use of LID techniques is not possible. In such case, LID stormwater management techniques shall still be used to meet water quality standards. Documentation of technical infeasibility shall include engineering calculations, geologic reports, hydrologic analyses, and site maps.

 
Incentives

Some communities encourage LID and stormwater BMPs through incentive programs and alternative or optional development standards, such as those described below.  

Green Factor

Seattle, Washington, and subsequently Indianapolis, Indiana, adopted the “green factor,” a performance-based landscaping system that encourages LID principles (and other benefits) by offering bonuses. Under the green factor, property owners are required to meet a minimum percentage parcel vegetation and can use various techniques to reach that threshold, including rainwater harvesting, drought tolerant plants, tree preservation, green roofs, and more. In Seattle, the green factor was originally limited to downtown business districts as a pilot program before applying it to other zoning districts. 

To read more about the green factor in Indianapolis, see page 531 of the adopted Indianapolis Consolidated Zoning and Subdivision Ordinance

Green Alley Program

Chicago, Illinois, has implemented several green infrastructure incentive programs to encourage LID, including the “green alley” that began in 2006 to showcase pilot projects testing various permeable paving materials for use in alleys to both reduce flooding and increase infiltration of runoff. The city shares its best practices related to this program in the Green Alley Handbook, available here:

cityofchicago.org/city/en/depts/cdot/provdrs/street/svcs/green_alleys.html 

Xeriscape Rebate Program

Aurora, Colorado, offers rebates to its customers willing to replace high-water grass lawns to low-water use landscaping. Eligible areas include residential front and side yards, and commercial or large property areas that are highly visible to the public. Low-water use landscapes are eligible for up to $3,000 in rebates, and areas that require no supplemental watering following plant establishment are eligible for up to $4,500 in rebates. Learn more about the program, here: 

https://www.auroragov.org/cms/one.aspx?pageId=3605519

Green Factor: Although rainwater harvesting is one of the encouraged LID techniques under the Green Factor program, it is not currently permitted under Colorado Law. Exceptions were made through House Bill 09-1129 to allow for pilot projects in select new developments to evaluate the feasibility of rainwater harvesting as a water conservation technique in Colorado.

Upcoming Events

There are no upcoming events