Site-Specific Hazard Assessment Model Code Language and Commentary

Table of Contents

x

Site-specific hazard assessments are conducted by local governments and trained hazard mitigation experts on individual parcels on a case-by-case basis. They may be used to help inform various types of development applications, such as site plan review, conditional or special use review, or proposed subdivisions. Depending on the scope and scale of a proposed project, the recommendations stemming from such an assessment can vary widely. The recommendations depend largely on site-specific conditions and/or mitigation objectives that the community has defined relative to one or more hazards.

Because each assessment is unique, the principal drafting task involves preparing enabling language that provides the authority to conduct such assessments. The following elements should be considered when drafting ordinance language to authorize site-specific assessments:

  • Purpose and Intent – Describes the purpose of the site-specific assessment, tailored to the hazards present in a community.
  • Applicability and Exemptions – Establishes the types of development applications that are subject to a site-specific assessment. This section identifies the areas within which site-specific assessments will be required and the types of projects for which they are required (e.g., new construction, building expansion, and alterations).
  • Procedures – This section establishes procedures for how site-specific assessments are conducted and the application submittal requirements. Some of the specifics related to administration of this procedure will likely be located outside of the land use regulations. See commentary at right.
  • Definitions – This section defines key terms necessary to fully implement and administer a site-specific assessment procedure.

Each of these elements may be drafted as individual sections or subsections of an article or chapter within a development code. The remainder of this model describes each element and provides standard language regarding hazard mitigation that may be considered by Colorado local governments. Model language is in blue shading. Commentary is located in italics in the column at the right. The model language used in this document is based on existing ordinances and/or resolutions from several communities around the state, including municipalities and counties. The language is illustrative only; consult local counsel to tailor language for your jurisdiction.

Commentary

Administration of this Procedure:  A site-specific hazard assessment procedure is not entirely administered through the land use code or zoning ordinance. Some communities have a separate set of checklists, criteria, and standards that live outside the ordinance in a handbook, developer’s guide, or administrative manual that is used as a reference and is either distributed to the applicant or is available on the local government website.

A developer’s guide or administrative manual allows the local government to make modifications to submittal requirements, fees, and in this case the hazard assessment protocols without amending the code.

In Eagle County, Colorado, the wildfire mitigation specialist uses a handbook to determine the overall hazard rating of a parcel. The handbook includes an assessment of various conditions such as access, roofing material, defensible space, electrical service lines, and water supply. From that assessment, the County determines what types of mitigation must be met prior to issuing a Certificate of Occupancy (CO).

Purpose

Establishing a clear purpose statement is essential to any development standard or procedure.

The purpose of this section is to:

  1. Provide staff and the [insert approval authority, e.g., Planning Commission, City Council, Board of County Commissioners] with an understanding of a development site’s specific constraints and distinguishing characteristics, especially as they relate to potential hazards;
  2. Identify areas subject to site-specific hazards such as avalanches, landslides, rockfalls, mudflows, unstable slopes, floodplains, wildfire risk areas, or other environmental development constraints;
  3. Avoid development in [insert level of risk as it pertains to mapped hazard areas or other policies – e.g., high-risk or moderate risk] areas;
  4. Ensure that hazard risk is reduced or that development in hazard areas is appropriately mitigated;
  5. Minimize impacts to environmentally sensitive areas; and
  6. Protect the public health, safety, and welfare.

Purpose and Intent: This section should list hazards and constraints that are commonly present in the community. Communities can also consider stronger language relating to avoiding development altogether in hazardous areas. Some communities choose to list individual purpose and intent elements (as in this example) instead of a single paragraph to improve user-friendliness.

When stating any purpose related to risk reduction and hazard avoidance, it is important to consider adopted policies from the Comprehensive Plan or the Hazard Mitigation Plan and use similar terminology in the code. 

Applicability and Exemptions

The applicability subsection should indicate which types of development applications (and in some cases, which specific geographic areas) are subject to site-specific hazard assessments. Communities with comprehensive mapping of hazard areas may opt to apply the procedure to multiple hazards, whereas other communities may only apply this procedure to flood or wildfire areas, for example. 

A site-specific hazard assessment shall be required for proposed applications for [insert or list application types where site-specific assessments are required - e.g., rezoning, subdivision, conditional use permit, variance, minor or major site plan, master plan, PUD] within the following areas:

A.         Steep land with [30 percent or greater] slopes or unstable ground;

B.         Land subject to geologic hazards such as landslide or rockfall;

C.         Land within designated flood hazard areas pursuant to [Section x.x (cross-reference floodplain regulations)];

D.         Land within wildfire hazard areas; and

E.         Land with other environmental development constraints as identified by the [Director, Zoning Administrator, or other authority].

Exemptions

Site-specific hazard assessments shall not be required for the following activities:

A.         Maintenance and repair of existing public roads and utilities within easements or public rights-of-way; and

B.         The expansion, remodeling, or reconstruction of an existing development so long as such expansion, remodeling, or reconstruction does not add more than [e.g., 10 or 25 percent, or other desired percentage] improved square footage and does not increase the amount of square footage within a hazard area.

Applicability: Generally, the site-specific assessment should apply to any type of development that has the potential to further aggravate an existing hazard or place additional density in harm’s way. Site-specific assessments should be applied to the extent possible given a community’s capacity to administer and enforce the program.

Mapping: Ideally communities will have accurate hazard maps available as the primary reference tool for determining when site-specific assessments are required. For more on mapping, see the sidebar on page 16 of the Planning for Hazards guide and a summary of data sources beginning on page 20 of the Planning for Hazards guide.

Exemptions: Expansions and alterations are often allowed through streamlined procedures in modern codes. This encourages infill and redevelopment to occur without adding unnecessary process or expenses. However, at some point an alteration becomes big enough that exemptions may not be appropriate.

Communities should select a standard definition of “major redevelopment” and apply that consistently throughout the code to the extent possible. For example, many communities identify a threshold for when new parking requirements apply to redevelopment projects; that same threshold should be considered for when a site-specific assessment is required.

An exemption in this part of the code does not mean that some hazard concerns will not be addressed through other processes. For example, the building code will likely require certain improvements for fire protection, wind, and snow load regardless of whether a site-specific assessment is required.

Procedures

A site-specific hazard assessment is not a stand-alone type of development application; rather, it is a tool that provides information to inform another type of application. For example, an applicant for a subdivision plat may be required to conduct an assessment of potential hazards on his or her property to help ensure that new lots are not created in hazard areas. Similarly, a site-specific hazard assessment may be required as part of a site plan review to help ensure that development is not located on a portion of a lot that is potentially subject to flooding or another hazard-related threat.

Because site-specific assessments may apply to multiple application types, the language describing them should be drafted as a common review procedure (see additional commentary at right), and then also cross-referenced in other sections of the ordinance that describe specific application types. For example, if site-specific assessments are required for both site plans and preliminary plats, the ordinance sections describing both of those procedures should include a cross-reference back to the site-specific hazard assessment procedure.

Depending on local capacity, field visits and assessments may be conducted in-house, or otherwise delegated to external contractors at the expense of the landowner. See additional commentary in the margin.

Common Review Procedures: Many modern land development codes include a separate section for common review procedures, rather than repeating similar requirements for each type of development application. Common review procedures make future updates a more streamlined and consistent process by limiting edits to one location within the document rather than having to edit multiple application procedures.

Subject Matter Experts: Similar to a pre-application meeting, for a site-specific hazard assessment it is imperative that the local government and partnering agency representatives attending the field visit are well-trained at assessing property for various hazard conditions. For example, in many communities the local fire district(s) conduct the site-specific hazard assessments for wildfire mitigation.

Site-Specific Hazard Assessment Procedure

A.         Pre-Application Determination (if required)

During a pre-application meeting, the [insert responsible party or agency, e.g., staff, Planning Director, Town Administrator] shall notify the applicant that a site-specific hazard assessment is required for any development listed in Section x.x. [insert cross-reference to applicability section earlier in ordinance].

B.         Field Visit Scheduling and Attendance (in-house)

  1. The applicant shall work with [staff/jurisdiction] to schedule a field visit prior to submitting an application.
  2. The site being considered for development shall be visited in the field by the [insert Planning Director and trained hazard expert(s)] and other individuals or agencies deemed appropriate by the [Planning Director, Town Administrator, etc.].
  3. The applicant shall attend the scheduled field visit.
  4. At the [Planning Director’s, or other authority] discretion, should inclement weather conditions limit the ability to adequately evaluate the site, the site visit may be rescheduled to a more favorable time and date.

C.         Checklists and Criteria

Checklists for the types of conditions and mitigation requirements that are used to conduct a site-specific hazard assessment field visit shall be available at the [Planning Department/City or County Website] and shall be distributed to the applicant prior to the field visit.

This section should mention the community’s administrative manual or guidebook, if such document exists, as mentioned in the commentary on page 1.

D.        Site-Specific Hazard Assessment

  1. Prior to the field visit the applicant shall clearly mark the approximate location of proposed building envelopes and any other proposed structures such as [decks, sheds, or outbuildings – tailor this list to match community requirements for building permits].
  2. During the field visit, officials shall communicate specific concerns related to hazards and other environmental development constraints to be addressed in a subsequent application submittal.
  3. Field observations shall be documented and distributed to the applicant within [five days, or more or less depending on capacity].

E.         Applicant Response to Assessment

  1. The applicant shall address and respond to field observations in their application submittal to the maximum extent practicable and in compliance with this [ordinance, code, etc.].
  2. The applicant shall make reasonable efforts to mitigate impacts of identified hazards and other environmental development constraints.
  3. Results from the field visit may indicate that the hazard rating or environmental development constraints are minimal to the effect of not requiring additional mitigation beyond compliance with this [ordinance, code, etc.]. 

In-House Assessment: Depending on the types of hazards present on a site, the planning department (or whoever organizes the field visit) should assemble the appropriate team. If the property is in a flood hazard and a wildfire hazard area, then you may have the local floodplain administrator and the fire department present for the field visit.

Externally Prepared Assessment: Many communities do not have properly trained geologists, professional engineers, wildfire mitigation specialists, or other trained hazard experts on staff. For these communities, the assessment procedure should be tailored to require a field visit and an assessment report prepared by qualified contractors to be submitted to the local government as part of the development review process.

Checklists and Criteria: The Boulder County Wildfire Partners program offers a checklist for landowners to create and maintain effective wildfire mitigation.

Sample assessment reports from that program are available here:

As another example, Eagle County outlines construction guidelines for development in wildfire areas as part of their wildfire mitigation assessments

Key Definitions

In this model for a site-specific hazard assessment procedure, the following terms should be defined (if used in the local ordinance):

Development (option 1): Any man-made change to improved or unimproved real estate, including but not limited to the construction, reconstruction, conversion, or expansion of any structure; any change in use of a property, building, or structure; and any mining, dredging, filling, grading, paving excavation or drilling operation. The term "development" shall also include the act of subdivision.

Development (option 2): The construction of a building or structure, any clearing, grading, excavation or other movement of land, or the division of a parcel of land into two or more parcels. 

Environmental development constraint: A natural environmental feature that typically precludes development, including but not limited to wetlands, steep slopes [insert what defines a steep slope in the community, e.g., 20-30 percent] or greater, floodplains, and areas subject to geological hazards (rockfall, mudslide, avalanche, etc.).

Maximum extent practicable (option 1): Under the circumstances, reasonable efforts have been made to comply with the regulation or requirement, that the costs of compliance clearly outweigh the potential benefits to the public or would unreasonably burden the proposed project, and reasonable steps have been undertaken to minimize any potential harm or adverse impacts resulting from noncompliance.

Maximum extent practicable/feasible (option 2): That no feasible and prudent alternative exists, and all possible efforts have been made to comply with the regulation or minimize potential harm or adverse impacts.

Upcoming Events

There are no upcoming events